Dust-Aid Platinum Sensor Cleaning Kit

Dust-Aid Platinum is a cleaning tool for removing dry, loose dust-particles from DSLR and Mirrorless sensors. It has been tested on all sensor types including those cameras with internal self-cleaning mechanisms. It is also safe to use on coated and uncoated sensor filters. Weighing around 30grams the Platinum kit is small, light and travel friendly.

The kit includes a wand with a silicone pad at one end and 6 cleaning strips. To use the Platinum simply peel the backing paper off one of the cleaning strips, then press the silicone pad onto the cleaning strip. Doing this cleans the silicone pad, once the pad has been cleared of dust, it is ready to use.

You then use the silicone pad to remove loose dust from your sensor. The silicone is naturally tacky, so dust adheres to it. Just gently press the pad down on your sensor and lift. Don't rub or drag the pad, just a simple press and lift. When you have used all 6 cleaning strips you can purchase a replacement pack of 12 strips to replenish your kit. You can find them here.

1 cleaning strip = 1 full clean.

PLEASE NOTE: The cleaning adhesive used to clean the Platinum's silicone has been developed and tested not to transfer any of the adhesive to the silicone.

Dust-Aid™ Platinum is designed to remove dry dust particles only. Any contamination remaining should be removed by a wet cleaning system such as the Dust-Aid Dust-Wand Kit or Swabs and Fluid.

It is important that all dry dust is removed from the sensor filter prior to using any wet cleaning method.

Need some more sensor cleaning advice? Look here.